|
The new look Caspian Integrated Amplifier benefits
from many superior quality components providing wider bandwidth, lower
distortion and more dynamic range for enhanced performance. Improved
ventilation for cooler running allows longer periods of increased sound level
before thermal protection cut out point. Its new higher power output devices,
high specification coupling capacitors, signal and driver transistors and improved
power supply provide a deeper and tighter bass, more open mid range and
smoother more detailed top end and better control over the loudspeakers than
its predecessor. All this combined with precise timing and enhanced sound
staging has redefined the performance of this world wide acclaimed amplifier.
With its new classic and timeless aesthetics the Caspian MSERIES-1 is an
integrated amplifier in a class of its own.
Features
- New
all silver front panel with red indicator lights
- New
chassis and cover with increased ventilation
- High
quality Mains inlet filter
- Full
functional System remote control (Silver Colour)
- 20%
higher output power (85 Watts/Channel into 8V,120 W/Ch into 4V)
- Dedicated
output protection board with high current relays
- Five
line inputs plus tape input and output
- Manual
input selector
- Tape
monitor function
- Manual
standby function
- Input
and status indicator
- Motorised
volume control with LED position indicator
- -20dB
mute function
- 2
pre-amplifier outputs
- Power
amplifier input (requires internal work for activation)
- 350VA
ultra low noise, low leakage Toroidal transformer
- Short
circuit protection
- Power
supply failure detection
- Pre
power-up diagnostic check
- Gold
plated input RCA connectors and speaker binding posts
|
|
Specifications
- Line
Inputs 5 plus Tape
- Input
Impedance 47 kW
- Input
Sensitivity (70W) Line 240mV
- Line
Outputs Tape, Preamplifier (x2)
- Output
Voltage 240mV (Tape Out), 700mV (Pre Out)
·
Power Outputs Loudspeaker, L & R
·
Output Power >85 Watts, into 8W, both channels driven
>120 Watts, into 4W , both channels driven
- Power
Supply 350VA Ultra Low Noise Toroidal Transformer
4 Regulated Supply Rails
- Current
Output 50 Amps Peak to Peak
- Damping
Factor 140 (8W)
- Frequency
response -3dB, <1Hz - 90kHz
- Gain 40dB Overall (Pre & Power), 9.3dB Preamplifier, 30.7dB Power
Amplifier
- Harmonic
Distortion 0.002% 1kHz, 0.015% 20kHz
10W - 8W
0.0025% 1kHz, 0.03% 20kHz 50W - 8W
- Signal
to Noise Ratio Line 108dBa (ref. 500mV)
85dBa (ref. 1W, 8W)
- Power
Source 100V - 120V 50Hz / 60Hz
220V - 240V 50Hz / 60Hz
(via Mains inlet filter)
- Power
Consumption < 230 W
- Dimension 432 x 330 x 70 (W x D x H) mm
432 x 330 x 80 (including feet)
- Weight 12 Kg
|
