Roksan

Caspian M-Series

Mono Block

Retail $2,495 CDN each

Contact us for sale price

The new look Caspian Mono Power Amplifier with its fully symmetrical complimentary circuit design benefits from split power supply utilising two sets of high speed, high efficiency bridge rectifier diodes and two sets of main reservoir smoothing capacitors. The front stage has low noise transistors with high current drivers feeding the output devices. Use of many superior quality components and dual power supply design allow the amplifier to have wider bandwidth, lower distortion and more dynamic range. Improved ventilation for cooler running ensures longer periods of increased sound pressure level before thermal protection cut out point. Thanks to its new higher power output devices, high specification coupling capacitors, signal and driver transistors and improved design, the Caspian Mono Amplifier has deep tight accurate bass, an open life like mid range and smooth detailed extended top end with incredible speed and control over the loudspeakers. Combined with precise timing, finesse and sound staging the Caspian MSERIES-1 is a world class amplifier to partner the best components in pure audio or high-end A/V systems.

Caspian MSeries preamplifier
2x Caspian MSeries mono block

"This Roksan is an excellent buy that puts most of the opposition to shame when it comes to sonic ability".

Features

• New all silver front panel with red indicator light

• New chassis with increased ventilation

• Split power supply (x2 High efficiency rectification and smoothing capacitors)

• Higher output power (100 Watts/Channel into 8 ,175 W/Ch into 4 )

• Dedicated output protection with high current relay

• Auto sensing standby function

• Chain signal output

• 350VA ultra low noise, low leakage Toroidal transformer

• Power supply failure detection

• Pre power-up diagnostic check

• Two sets of gold plated speaker output binding posts

• Gold plated RCA signal connectors

Specifications

• Input Impedance 38 k

• Input Sensitivity 700mV RMS

• Signal Inputs Signal In x1

• Signal Outputs Chain Output x1

• Power Outputs Loudspeaker x2

• Output Power 100 Watts, into 8
  175 Watts, into 4
  250 Watts, into 2
  330 Watts, into 1
  (Note: Low impedance loads driven continuously at high power may trip the amp into protection mode)

• Power Supply 350VA Ultra Low Noise Toroidal Transformer

• Current Output 80 Amps Peak to Peak

• Damping Factor 400 (8 )

• Frequency response -3dB, <2Hz - >150kHz

• Gain 30.7dB

• Harmonic Distortion 0.0015% 1kHz, 0.008% 20kHz 10W - 8
  0.002% 1kHz, 0.02% 20kHz 50W - 8

• Signal to Noise Ratio >116dB (ref 85W, 8 )

• Power Source 100V - 120V 50Hz / 60Hz
  220V - 240V 50Hz / 60Hz
  (via Mains inlet filter)

• Power Consumption < 230 W

• Dimension 432 x 330 x 70 (W x D x H) mm
  432 x 330 x 80 (including feet)

• Weight 10 Kg