Rated Continuous Average Output Power (both channels operating simultaneously, 20 - 20,000 Hz)
300 W/ch 1-ohm load (*)
200 W/ch 2-ohm load
100 W/ch 4-ohm load
50 W/ch 8-ohm load
Note: *1-ohm operation possible with music signals only.
Total Harmonic Distortion (both channels operating simultaneously, 20 - 20,000 Hz)
0.05% 2-ohm load
0.03% 4 to 16 ohm load
Intermodulation Distortion 0.01%
Frequency Response
HIGH LEVEL INPUT
At rated continuous average output: 20 - 20,000 Hz +0, –0.5 dB
MAIN IN
At rated continuous average output: 20 - 20,000 Hz +0, –0.2 dB
At 1 watt output: 3 - 150,000 Hz +0, –3.0 dB
Damping Factor 1000 (with 8-ohm load, 50 Hz)
Gain
HIGH LEVEL INPUT ? PRE OUTPUT: 18 dB
MAIN IN ? OUTPUT: 28 dB
Tone Controls Turnover frequency and adjustment range
BASS: 300 Hz ±10 dB (50 Hz)
TREBLE: 3 kHz ±10 dB (20 kHz)
Loudness compensator +6 dB(100 Hz)
Attenuator -20 dB
Bar graph meter Represents output voltage value (dB) using 30 points
With meter on/off switching function
Output Load Impedance 2 to 16 ohms
Stereo Headphones Suitable impedance: 8 ohms or higher
Power Requirements 120 V/220 V/230 V AC, 50/60 Hz
(Voltage as indicated on rear panel)
Power Consumption 180 W idle
390 W in accordance with IEC 60065
Maximum Dimensions Width 465 mm (18.31")
Height 239 mm (9.41")
Depth 502 mm (19.76")
Mass 36.0 kg (79.4 lbs) net
45.0 kg (99.2 lbs) in shipping carton
