The iFi iPower X works with most DC powered devices that come a wall wart, otherwise known as a switched-mode power supply (SMPS). Check the voltage of the device you want to power and make sure that the specific iFi model for that voltage has enough current to sufficiently power the piece. For example, on a device with a 5V/2.5A power supply, the iFi iPower X 5V model is perfect at 3.0A with more current available than specified.
Pure silence. Clean power to the maX.
With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment.
The original iFi iPower provides an effective, clean power solution for noise in your system.
But why not push your power upgrade to the max with the all-new iFi iPower X?
Our new ultra-low noise AC/DC power supply has been optimised to take advantage of new knowledge, components and tech in the world of super high-frequency power supply design.
The iPower X uses Active Noise Cancellation II to cancel all incoming EMI or RFI noise.
This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones?
This is what the iPower X does to your power supply.
As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside.
The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower.
In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality.
Crème de la crème components
We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS!
In a nutshell, there is no escape for unwanted noise!
All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before.
Sleek, modern design
The iPower X comes dressed in a new cream/beige chassis for a cool, clean look.
We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains.
And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately).
And one more thing…
Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found?
Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear.
Cleaner sound AND the show goes on! What’s not to like?
It does this in a similar way to active noise-cancelling headphones – it generates a signal identical to that of the incoming electrical noise but in the opposite phase, actively cancelling it out. This is highly effective at removing low- and mid-frequency noise, while passive insulating filters deal with higher frequency interference. This combination is measurably more effective at eradicating noise corrupting the USB signal than devices relying solely on passive filtering.
It reduces the noise floor by > 40dB (> 100x).
When compared to the original iPower:
i. Input capacitance is 50% larger; 47uf instead of 33uf.
ii. Output capacitance is 150% larger.